E340 6-way rackmount microphone splitter provide three microphone level outputs from one microphone level input. Outputs A and B are transformer isolated from the input.

The Direct Output is connected in parallel with the input XLR.Both the Direct Output and Output A will pass phantom power to the input XLR. To disable this facility on Output A, remove the unit from it’s base and cut the link on the track (copper) side of the printed circuit board.

Earth Lift switch operates on Output B only. It may be useful in reducing hum problems and solving ground/earth loops in some applications. The phase reverse switches may be used, in combination, to correct phase errors in microphones or leads. They can also be useful in reducing howlround in on-stage monitoring systems.

Assembly :

- E335 panel mounting microphone splitter
- E336 19” rack frame
- E337 blanking panels

 

Frequency response:	20Hz to 20kHz ±0.25dB
Input level:	Maximum at 30Hz + 4dBm
Dimensions:	483mm (19") x 133mm (3U) x 100mm

*For product improvment, this product is subject to modification without notice.

Quantity: